Asus ROG Strix Ace XG248QSG Announced with a 24″ 610Hz Panel for Competitive Gaming

Today at a pre-Computex media day Asus announced their new ROG Strix Ace XG248QSG gaming monitor, aimed at professional and eports gamers. It’s a 24.1″ sized screen built around a so-called “Super TN” panel and offers a 1920 x 1080 resolution and a massive 610Hz refresh rate. It’s clearly aimed at a niche gaming market, for those who are still after a small sized screen and are focused almost entirely on speed, latency and refresh rate. This is a follow up to their ROG Swift Pro PG248QP which had “only” a 540Hz refresh rate and which we reviewed a while back.
Asus ROG Strix Ace XG248QSG Specs

The new screen is 24.1″ in size with a flat format, and it’s built around a “Super TN” Film panel. There’s a 1920 x 1080 resolution, 0.1ms G2G response time spec, 170/160 viewing angles and an extended colour gamut covering 90% DCI-P3. Further specs are still pending.
It’s actually a native 600Hz panel but Asus have included a small 10Hz overclock in order to offer something that little bit faster on paper than some competing 600Hz models that are appearing on the market. This is supported by adaptive-sync
Asus even specifically talk about the input lag of the monitor, saying that it offers a 0.8ms lag which is “2.25X faster than competing esports monitors” they say.

ELMB 2
This new monitor also supports Asus’ “Extreme Low Motion Blur 2” (ELMB 2) tech. ELMB 2 is a backlight strobing technique designed to tackle the blur that arises from sample-and-hold and this is a new take on their blur-crushing technique that uses new dual backlight technology to enhance blur reduction performance. With two strips of backlight LEDs and ten total backlight zones, the XG248QSG offers exceptional clarity for objects in motion, giving you better tracking of opponents in the heat of battle.

Previous implementations of the tech strobed the entire backlight at once, but monitors scan out row by row, creating a timing problem. The tech could create an optimal zone of clarity in the centre of the screen — which is, to be fair, where gamers focus most of their attention — but blur and strobe crosstalk might appear in other regions of the screen, particularly the upper right and lower right corners.
ELMB 2 addresses this problem with a multi-zone edge backlight. It allows for independent pulse control for each region of the display. The screen can time the backlight strobe for each segment of the display separately, ensuring low motion blur across the entire display. From the limited tests we were able to run in person at Computex, this seemed to work well, with basically the same visual performance across the entire screen area.

Thankfully Asus have also been focusing on the brightness of the screen when using ELMB 2 mode. The ROG Strix Ace XG248QSG offers 370 nits of brightness with ELMB 2 enabled at its recommended level three setting. They say “that’s roughly three times brighter than the first-generation tech, and 65% brighter than comparable solutions from our competitors.”
Designed with esports setups in mind

Asus have also reduced the footprint of its stand by 30% compared to the current ROG Strix XG Series stand design, ensuring that the stand doesn’t interfere with your mousing hand in the middle of the action.
A wide range of ergonomic adjustments, including an impressive 160mm height adjustment range and the ability to tilt the display backward a full 35°, let you position the display just where you need it.
Promotional video
Pricing and Availability
The screen is due to be released in August at a price of $799 USD.
Source: Asus
Stay up to date with all our Computex 2025 coverage here:
We may earn a commission if you purchase from our affiliate links in this article- TFTCentral is a participant in the Amazon Services LLC Associates Programme, an affiliate advertising programme designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com, Amazon.co.uk, Amazon.de, Amazon.ca and other Amazon stores worldwide. We also participate in a similar scheme for Overclockers.co.uk, Newegg, Bestbuy , B&H and some manufacturers.
Stay up to date
![]() | ![]() | ![]() | ![]() |
Browser Alerts | Follow us on X (Twitter) | Subscribe | Support Us |
Popular Trending News
Gigabyte Announce MO27Q28G with a 27″ Primary RGB Tandem WOLED Panel [Updated] May 23, 2025 Originally published 21 May 2025, last updated 26 June 2025 Showcased this week at Computex 2025 was Gigabyte’s new MO27Q28G. Breaking from recent tradition, this is a new LG.Display WOLED monitor, with the company previously having being largely tied to…
LG.Display Confirm Successful Development of a 720/540Hz 4th Gen WOLED Panel Coming Later This Year June 27, 2025 Conveniently (and perhaps not so coincidentally) following on from our news yesterday, LG.Display have officially announced today that they have “successfully developed a 540Hz OLED monitor panel – surpassing the highest refresh rate currently available – and plans to unveil…
LG UltraFine 32U990A Announced with a 6K Resolution and Thunderbolt 5 March 25, 2025 Originally published 9 January 2025, last updated 25 March 2025 LG’s latest UltraFine 32U990A monitor is the world’s first 6K high-resolution monitor to come with Thunderbolt 5 connectivity, which Apple introduced late last year with the launch of new Mac…
MSI MPG 274URDFW E16M with a 27″ 4K 160Hz / FHD 320Hz Dual-Mode IPS Panel and Mini LED Backlight May 27, 2025 Originally published 2 January 2025, last updated 27 May 2025 Back in January for CES, MSI announced their new MPG 274URDFW E16M gaming monitor and we’ve now had chance to get further information and specs at Computex 2025 in May.…
LG 40WT95UF Launched with 40″ Ultrawide 5K2K Resolution IPS Black Panel July 2, 2025 LG have released an interesting new screen in their UltraFine range, aimed at productivity, professional and general applications. It’s a large 40″ ultrawide screen with a 21:9 aspect ratio. It’s built around an LG.Display IPS Black LCD panel, offering a…